SWITCHES
Centrally Managed Wis Cloud Controller WCAC
Wireless
Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
Access Control L2 (MAC address-based), L2 client isolation
Wireless Intrusion Detection (WIDS) Rogue AP detection
802.11e/WMM Supported
Rate Limiting Supported
Wlan Group Supported
RF Management Automatic channel and power optimization
Client Load Balancing Automatic
Guest Access Supported
Captive Portal Supported
Mesh(Wireless Uplink) Supported
Network Architecture
IP IPv4 / IPv6
VLANs 802.1Q (8 BSSID per radio)
Redundancy 1+1 with auto-synchronization
Capactity
Managed APs Unlimited
Concurrent Users Unlimited
Management
Conguration Web GUI, CLI
AP Provisioning L2 or L3 auto-discovery,Auto online software upgrade
Trafic History Supported
Physical Characteristics
Processor Dual-Core 1.8GHz CPU
Memory 2GB DDR RAM
Hardisk 8GB SSD
Ethernet 1*10/100/1000Mbps Data Port,1*10/100/1000Mbps Management Port
LED Power& SSD Indicator
Other Interface 2*USB2.0,1 Console RJ-45 port
Power Input: 110 – 240V AC,Output:12VDC/5A
Weight 2.2 kg
Temperature Working Temperature:10~60,Storage Temperature:-20~70
Relative Humidity 5%-95%,no-condensing
Installation Desk-top & Rack-mount
Dimension 430mm*250mm*46mm (19 inches, 1U)
Fast Ethernet 10port Switch PoE Cudy FS1010P
Support IEEE802.3at and IEEE802.3af Standard
120W PoE power output totally,up to 32W for one PoE port
Support IEEE802.3x full duplex and half duplex control
Support VLAN and CCTV Function
Panel lights to monitor working state and help fault analysis
Perfect security mechanism
Line-speed forwarding intelligent identication
Fast Ethernet 10port Switch PoE Cudy FS1010PG
Support IEEE802.3at and IEEE802.3af Standard
120W PoE power output totally,up to 32W for one PoE port
Support IEEE802.3x full duplex and half duplex ?ow control
Support VLAN and CCTV Function
Panel lights to monitor working state and help fault analysis
Perfect security mechanism
Line-speed forwarding intelligent identification
Fast Ethernet 10port Switch PoE Stonet P110C
Supporting 802.3 Ethernet, 802.u Faster Ethernet;
Supports POE IEEE 802.3af/at compliant Powered Device (PD)
Modes: Normal switch mode/Extended mode(Port1-4:250Metres ultra-long
transmission)
Ports 1~8 features POE power supply capability and can be used as Power over
2 UPlink ports
Ethernet devices;
Auto MDI/MDIX crossover for all ports
Support full duplex based on IEEE802.3x and half duplex based on Backpressure
Support non-blocking wire speed forwarding
MAC address auto-learning & auto-aging
Steel case,the total POE power budget of 120 W
Just Plug and Play
Fast Ethernet 10port Switch PoE Stonet P110GH
Supporting 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T;
Supports POE IEEE 802.3af/at compliant Powered Device (PD)
Modes: Normal switch mode/Extended mode(Port1-8:250Metres ultra-long transmission)
Ports 1~8 features POE power supply capability and can be used as Power over
2 Gigabit Up-link ports and 1 SFP fiber port
Ethernet devices;2*10/100/1000Base-T Uplink and 1*1000Base-X SFP.
Support full duplex based on IEEE802.3x and half duplex based on Backpressure
Auto MDI/MDIX crossover for all ports
Support non-blocking wire speed forwarding
MAC address auto-learning & auto-aging
Steel case, the total POE power budget of 120W
Just Plug and Play
Fast Ethernet 18port Switch PoE Cudy FS1018PS1
200 watts PoE power supply, up to 30 watts per port
10/100/1000M uplink ports +1 SFP Port
16 10/100M PoE+ ports
CCTV mode support remote PoE feeding up to 250m
VLAN mode isolate each PoE Ports for security
IEEE 802.3at / IEEE 802.3af standard compliant
Plug&play, simple setup with no configuration needed
Watchdog reactivates the abnormalPD by resuming POE power
Fast Ethernet 18port Switch PoE Stonet P116GH
Supporting 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T;
Supports POE IEEE 802.3af/at compliant Powered Device (PD)
Modes: Normal switch mode/Extended mode(Port1-16:250Metres ultra-long transmission)
Ports 1~16 features POE power supply capability and can be used as Power over
2 Gigabit Up-link ports and 1 SFP fiber port
Ethernet devices;2*10/100/1000Base-T Uplink and 1*1000Base-X SFP.
Support full duplex based on IEEE802.3x and half duplex based on Backpressure
Auto MDI/MDIX crossover for all ports
Support non-blocking wire speed forwarding
MAC address auto-learning & auto-aging
Steel case, the total POE power budget of 200W
Just Plug and Play
Fast Ethernet 26port Switch PoE Cudy FS1026PS1
24 x 10/100M PoE+ ports
2 x Gigabit Uplink port
1 x 1.25Gbps SFP slot
300 Watts PoE power budget
IEEE 802.3at / IEEE 802.3af standard compliant
Plug&play, simple setup with no configuration needed
Fast Ethernet 6port Switch PoE Cudy FS1006P
Complies with IEEE802.3af/at Standard
Supports PoE power up to 32W for each PoE port
Auto detect non PoE device and PoE device
Power prioritization guarantee power supply of key nodes
CCTV/VLAN mode switch, remote power and data up to 250m
Supports IEEE802.3 x full duplex / half duplex control
Supports storage and forward for Data exchange