BUSINESS NETWORKING
Antenna Dish 30dBi 5GHz Wis AND5830
Frequency 4.9~6.0GHz
Gain 30dBi
Horizontal Beamwidth 6°
Vertical Beamwidth 6°
Max VSWR <1.5
F/B Ratio >38 dB
Wind Survivability 125mph
Polarization Dual-Polarization
Connectors 2*N-type Female
Temperature 40~80
Dimenstion(mm) Φ600
Certification CE,RoHS
Weight(kg) 8
Packing 1psc/8kg/80*20*73cm/ctn
Antenna Omni Directional 12dBi 2.4GHz Wis ANO2412
Frequency 2.3-2.7GHz
Gain:12dBi
Horizontal Beamwidth:360°
Vertical Beamwidth:7°
Max VSWR<1.5
F/B Ratio N/A
Wind Survivability:150mph
Dual-pola Omni,
2*2 MIMO
N-type connectors
Polarization:Dual-Polarization
Certification:CE,RoHS
Temperature:-40 ~ 80°C
Dimenstion(mm):Φ13.6*150
Weight(kg):0.1
Antenna Omni Directional 12dΒi 5GHz Wis ANO5812
Frequency:4.9-5.9GHz
Gain:12dBi
Horizontal Beamwidth:360°
Vertical Beamwidth:7°
Max VSWR<1.5
F/B Ratio N/A
Wind Survivability:150mph
Dual-pola Omni,
2*2 MIMO
N-type connectors
Polarization:Dual-Polarization
Certification:CE,RoHS
Temperature:-40 ~ 80°C
Dimenstion(mm):Φ13.6*150
Weight(kg):0.1
Fast Ethernet 18port Switch PoE Cudy FS1018PS1
200 watts PoE power supply, up to 30 watts per port
10/100/1000M uplink ports +1 SFP Port
16 10/100M PoE+ ports
CCTV mode support remote PoE feeding up to 250m
VLAN mode isolate each PoE Ports for security
IEEE 802.3at / IEEE 802.3af standard compliant
Plug&play, simple setup with no configuration needed
Watchdog reactivates the abnormalPD by resuming POE power
Fast Ethernet 18port Switch PoE Stonet P116GH
Supporting 802.3, 802.u Faster Ethernet, IEEE 802.3ab 1000BASE-T;
Supports POE IEEE 802.3af/at compliant Powered Device (PD)
Modes: Normal switch mode/Extended mode(Port1-16:250Metres ultra-long transmission)
Ports 1~16 features POE power supply capability and can be used as Power over
2 Gigabit Up-link ports and 1 SFP fiber port
Ethernet devices;2*10/100/1000Base-T Uplink and 1*1000Base-X SFP.
Support full duplex based on IEEE802.3x and half duplex based on Backpressure
Auto MDI/MDIX crossover for all ports
Support non-blocking wire speed forwarding
MAC address auto-learning & auto-aging
Steel case, the total POE power budget of 200W
Just Plug and Play
Fast Ethernet 26port Switch PoE Cudy FS1026PS1
24 x 10/100M PoE+ ports
2 x Gigabit Uplink port
1 x 1.25Gbps SFP slot
300 Watts PoE power budget
IEEE 802.3at / IEEE 802.3af standard compliant
Plug&play, simple setup with no configuration needed
Wireless Base Station AC 867Mbps 5GHz Outdoor Wis S800AC WiController
Physical Characteristics
Dimension 214*92*32mm
Wight 0.24kg
Enclosure Weatherproof ASA
ESD Protection 16kV
Lightning Protection 2kV
Working Temp -30 ~ 70°C
Storage Temp -40 ~ 85°C
Power 24VDC, 0.75A
Power Consuption 6W
Button Reset
Certification CE, RoHS,FCC
Working Humidity 10%~95% non-condensing
Processor Atheros 720MHz
LAN port 1x 10/100/1000 Base-T Ethernet (Gigabit LAN with Passive PoE)
LED Power:On/Off; LAN:On/Off/Flashing; WLAN:On/Off/Flashing;RSSI Signal: 1,2,3
Wireless Characteristics
RX Sensitivity 300M: -74dBm@10% PER
54M: -78dBm@10% PER
1M: -98dBm@10% PER
Antenna 2* RP-SMA antenna connector
Wireless Security WPA/WPA2;WPA-PSK/WPA2-PSK (AES/TKIP) Encryption; 64/128-bit WEP
Wi-Fi Standard 802.11ac/n/a
Frequency 5GHz
Speed 867Mbps
Max Tx Power 27dBm
Advanced Characteristics
VLAN 802.1q
MAC Filter Blacklist
User QoS Speed Limit by User Group
Trunk Port Supported
Firewall Integrated Firewall
NMS WiController